1LY(T)-625 Series Tractor Mounted Farming Disc Plough

1LYQ drive disc plough is mounted on a tractor through a rear mounted three-point linkage.

During the working process of the implement, the motive power is transferred to the gear case of the disc plow through a back power takeoff shaft (PTO) of the tractor to drive the discs of the disc plow to rotate. The drive disc plow, which is mainly suitable for paddy field plowing, has the advantages of no weed winding, highly operational quality and high working efficiency.

Scope of application:

1. The disc plough is directly mounted to the Tractors.

2. The plough is a hydraulically operated basic implement for the preparation of land.

3. It is available in a basic 2, 3, 4, 5- furrow version with the kit for converting ploughs with even more furrows.

4. The Disc Plough is especially useful in hard and dry trashy, stumpy land conditions and in soils where scouring is a major problem.

5. Heavy-duty frame has high trash clearance allowing the plough to operate under heavy crop residual.

6. Being fully mounted and comparatively lighter in weight results lighter draft as compared to equivalent trailed plough where more power is required to operate and consequently higher operating costs

Advantages:

1. Only partial inversion of the soil so that plant residue is left on the surface, thus reducing the erosion risk and water losses by evaporation.

2. Mixing action on loose soils.

3. Rolls over obstacles so that hardly any breakage occurs.

4. Lower risk of choking (sugarcane, cotton, maize).

5. Fewer problems with sticky soils.

6. Hardly any smearing of the furrow bottom (plough sole).

7. The wear is spread over the entire circumference of the disc (2m of cutting edge on discs with a diameter of 65cm).

8. The discs are self sharpening.

9. Easier adjustment.

Specification:

1. Agricultural disc plough
2. Three-point mounted linkage
3.Working power (HP):18-80
4.Long service life
5. 6 available modes